Sandtrapper SL is a newer product style that was designed as a direct, comparative product -- for instances when competitive products incorrectly pair their "best" products against Sandtrapper II and Sandtrapper MD.

The "soft-loft" technology is very different than other Sandtrapper styles. The SL option is constructed with thinner, low-denier polyester fibers and a lightweight binder. The product is much thicker than other Sandtrapper styles, but doesn't share the critical compressive-resistant properties that define the best performing bunker liners.

SANDTRAPPER SL

The new soft-loft style provides a low-cost option for those looking to have solid, baseline performance against washouts and sand contamination. With soft-loft technologies, the ratio of fibers to binder increases while the lightweight binder provides a more flexible matrix.

Direct and proper product comparisons show that tensile strength is greater than competitive products while basic product characteristics such as thickness fall within the same parameters.

COMPRESSION RESISTANCE

It has long been the philosophy of Sandtrapper product developers that the integrity of the three dimensional matrix is the single most important performance characteristic. The lightweight fibers and binders compress on the load of just a few inches of sand.

Without the matrix intact, sand particles cannot be constrained as well as with other Sandtrapper styles. Water dynamics will force sand particles into an active state during rain events, increasing the occurrences of washouts. For this purpose, Sandtrapper SL should be used in bunkers with shallow, less severe slopes.

PRODUCT DIMENSIONS

Sandtrapper SL is available in a roll widths of 56" with a total of 560 square feet of coverage area, respectively.